Pressure Regulator (With Over Pressure Shut Off)

REG-0202 Pressure Regulator is a lever operated spring Loaded type regulator equipped with over pressure safety Protection. These regulators are suitable for Natural Gas. LPG, Air & similar applications. It provides economical pressure reducing control in a variety of Residential, Commercial & Industrial Applications.

Technical Specification :

Spring Ranges :

Working Principle : When downstream demand decreases, pressure under the diaphragm increases. This pressure overcomes regulator setting which is set by a spring. This results in movement of pad holding assembly towards seat to minimize gas flow area. If the demand of downstream increases, pressure under the diaphragm decreases. Spring force pushes the diaphragm lever assembly downwards which results in movement of pad holding assembly away from the seat to increase the gas flow area.

GA Drawing & Part List

Adjustment :To increase the outlet pressure setting of the regulator, the spring adjustment screw (Part No. 46) must be turned colkwise with the help of 14 mm allen key. This requires removal of cap (Part No. 47) Do not adjust the spring to produce an outlet pressure setting above the limit identified on the information Label. After the completion of Spring adjustment, replace the cap.

Spare Part Use :